Computer-aided full-wave electromagnetic (EM) analysis has been used in microwave engineering for the past decade. Initially, its main application area was design verification. Today, EM-simulation-driven optimization and design closure become increasingly important due to the complexity of microwave structures and increasing demands for accuracy. In many situations, theoretical models of microwave structures can only be used to yield the initial designs that need to be further fine-tuned to meet given performance requirements. In addition, EM-based design is a must for a growing number of microwave devices such as ultra-wideband (UWB) antennas, dielectric resonator antennas and substrate-integrated circuits. For circuits like these, no design-ready theoretical models are available, so design improvement can only be obtained through geometry adjustments based on repetitive, time-consuming simulations. On the other hand, various interactions between microwave devices and their environment, such as feeding structures and housing, must be taken into account, and this is only possible through full-wave EM analysis. Electromagnetic simulations can be highly accurate, but they tend to be computationally expensive. Therefore, practical design optimization methods have to be computationally efficient, so that the number of CPU-intensive high-fidelity EM simulations is reduced as much as possible during the design process. For the same reasons, techniques for creating fast yet accurate models of microwave structures become crucially important. In this edited book, the authors strive to review the state-of-the-art simulation-driven microwave design optimization and modeling. A group of international experts specialized in various aspects of microwave computer-aided design summarize and review a wide range of the latest developments and real-world applications. Topics include conventional and surrogate-based design optimization techniques, methods exploiting adjoint sensitivity, simulation-based tuning, space mapping, and several modeling methodologies, such as artificial neural networks and kriging. Applications and case studies include microwave filters, antennas, substrate integrated structures and various active components and circuits. The book also contains a few introductory chapters highlighting the fundamentals of optimization and modeling, gradient-based and derivative-free algorithms, metaheuristics, and surrogate-based optimization techniques, as well as finite difference and finite element methods. Contents:Introduction to Optimization and Gradient-Based Methods (Xin-She Yang and Slawomir Koziel)Derivative-Free Methods and Metaheuristics (Xin-She Yang and Slawomir Koziel)Surrogate-Based Optimization (Slawomir Koziel, Leifur Leifsson, and Xin-She Yang)Space Mapping (Slawomir Koziel, Stanislav Ogurtsov, Qingsha S Cheng, and John W Bandler)Tuning Space Mapping (Qingsha S Cheng, John W Bandler, and Slawomir Koziel)Robust Design Using Knowledge-Based Response Correction and Adaptive Design Specifications (Slawomir Koziel, Stanislav Ogurtsov, and Leifur Leifsson)Simulation-Driven Design of Broadband Antennas Using Surrogate-Based Optimization (Slawomir Koziel and Stanislav Ogurtsov)Neural Networks for Radio Frequency/Microwave Modeling (Chuan Zhang, Lei Zhang, and Qi-Jun Zhang)Parametric Modeling of Microwave Passive Components Using Combined Neural Network and Transfer Function (Yazi Cao, Venu-Madhav-Reddy Gongal-Reddy, and Qi-Jun Zhang)Parametric Sensitivity Macromodels for Gradient-Based Optimization (Krishnan Chemmangat, Francesco Ferranti, Tom Dhaene, and Luc Knockaert)Neural Space Mapping Methods for Electromagnetics-Based Yield Estimation (JosAc E Rayas-SAinchez)Neural Network Inverse Modeling for Microwave Filter Design (Humayun Kabir, Ying Wang, Ming Yu, and Qi-Jun Zhang)Simulation-Driven Design of Microwave Filters for Space Applications (Elena DAsaz Caballero, JosAc Vicente Morro Ros, HAcctor Esteban GonzAilez, Vicente Enrique BAaria Esbert, Carmen Bachiller MartAsn, and Angel Belenguer Martinez)Time Domain Adjoint Sensitivities: The Transmission Line Modeling (TLM) Case (Mohamed H Bakr and Osman S Ahmed)Boundary Conditions for Two-Dimensional Finite-Element Modeling of Microwave Devices (Tian-Hong Loh and Christos Mias)Boundary Conditions for Three-Dimensional Finite-Element Modeling of Microwave Devices (Tian-Hong Loh and Christos Mias) Readership: Graduates, lecturers, and researchers in electrical engineering, as well as engineers who use numerical optimization in their design work. This book will be of great interest to researchers in the fields of microwave engineering, antenna design, and computational electromagnetics. Keywords:Computer-Aided Design;Electromagnetic Simulation;Microwave Design;Numerical Optimization;Surrogate ModelingKey Features:This book summarizes the latest developments in the fieldIt provides a balanced coverage of classical and engineering-oriented optimization methods in one volume, and also includes methodologies not covered by any other book elsewhere, such as robust modeling methodologies (both conventional and modern) and physically-based approaches; surrogate-based techniques and microwave-engineering specific approaches simulation-driven design methods for computationally expensive problemsThis book covers both introductory materials, practical methods and algorithms, as well as applications and case studiesIn some cases, coarse models can be formulated using analytical or semi- empirical formulas (Robinson et al., 2008). ... In microwave engineering, there are several possibilities to obtain the physics-based low-fidelity model. In some casesanbsp;...
|Title||:||Simulation-Driven Design Optimization and Modeling for Microwave Engineering|
|Author||:||Slawomir Koziel, Xin-She Yang, Qi-Jun Zhang|
|Publisher||:||World Scientific - 2013-03-14|